Daily Rules, Proposed Rules, and Notices of the Federal Government
In accordance with sections 735(d) and 777(i)(1) of the Tariff Act of 1930, as amended (the “Act”), on June 5, 2008, the Department published the
The merchandise subject to this proceeding is certain welded carbon quality steel pipes and tubes, of circular cross-section, and with an outside diameter of 0.372 inches (9.45 mm) or more, but not more than 16 inches (406.4 mm), whether or not stenciled, regardless of wall thickness, surface finish (
Specifically, the term “carbon quality” includes products in which (a) iron predominates, by weight, over each of the other contained elements; (b) the carbon content is 2 percent or less, by weight; and (c) none of the elements listed below exceeds the quantity, by weight, as indicated:
Standard pipe is made primarily to American Society for Testing and Materials (“ASTM”) specifications, but can be made to other specifications. Standard pipe is made primarily to ASTM specifications A-53, A-135, and A-795. Structural pipe is made primarily to ASTM specifications A-252 and A-500. Standard and structural pipe may also be produced to proprietary specifications rather than to industry specifications. This is often the case, for example, with fence tubing. Pipe multiple-stenciled to a standard and/or structural specification and to any other specification, such as the American Petroleum Institute (“API”) API-5L specification, is also covered by the scope of this investigation when it meets the physical description set forth above and also has one or more of the following characteristics: is 32 feet in length or less; is less than 2.0 inches (50 mm) in outside diameter; has a galvanized and/or painted surface finish; or has a threaded and/or coupled end finish. (The term “painted” does not include coatings to inhibit rust in transit, such as varnish, but includes coatings such as polyester.)
The scope of this investigation does not include: (a) pipe suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heaters, whether or not cold drawn; (b) mechanical tubing, whether or not cold-drawn; (c) finished electrical conduit; (d) finished scaffolding; (e) tube and pipe hollows for redrawing; (f) oil country tubular goods produced to API specifications; and (g) line pipe produced to only API specifications.
The pipe products that are the subject of this investigation are currently classifiable in HTSUS statistical reporting numbers 7306.30.10.00, 7306.30.50.25, 7306.30.50.32, 7306.30.50.40, 7306.30.50.55, 7306.30.50.85, 7306.30.50.90, 7306.50.10.00, 7306.50.50.50, 7306.50.50.70, 7306.19.10.10, 7306.19.10.50, 7306.19.51.10, and 7306.19.51.50. However, the product description, and not the Harmonized Tariff Schedule of the United States (“HTSUS”) classification, is dispositive of whether merchandise imported into the United States falls within the scope of the investigation.
On July 15, 2008, in accordance with section 735(d) of the Act, the ITC notified the Department of its final determination, pursuant to section 735(b)(1)(A)(i) of the Act, that an industry in the United States is materially injured by reason of less-than-fair-value imports of subject merchandise from the PRC. Therefore, in accordance with section 736(a)(1) of the Act, the Department will direct U.S. Customs and Border Protection (“CBP”) to assess, upon further instruction by the Department, antidumping duties equal to the amount by which the normal value of the merchandise exceeds the export price (or constructed export price) of the merchandise for all relevant entries of CWP from the PRC. These antidumping duties will be assessed on all unliquidated entries of CWP, except for entries of merchandise exported and produced by Jiangsu Yulong Steel Pipe Co., Ltd. (“Yulong”), from the PRC entered, or withdrawn from the warehouse, for consumption on or after January 15, 2008, the date on which the Department published its preliminary determination.
With regard to the ITC's negative critical circumstances determination, we will instruct CBP to lift suspension, release any bond or other security, and refund any cash deposit made to secure the payment of antidumping duties with respect to entries of the merchandise entered, or withdrawn from warehouse, for consumption on or after October 17, 2007, but before January 15, 2008 (
Section 733(d) of the Act states that instructions issued pursuant to an affirmative preliminary determination may not remain in effect for more than four months except where exporters representing a significant proportion of exports of the subject merchandise request the Department to extend that four-month period to no more than six months. At the request of exporters that account for a significant proportion of CWP, we extended the four-month period to no more than six months.
Effective on the date of publication of the ITC's final affirmative injury determination, CBP, pursuant to section 735(c)(3) of the Act, will require, at the same time as importers would normally deposit estimated duties on this merchandise, a cash deposit equal to the estimated weighted-average antidumping duty margins as listed below. The “PRC-wide” rate applies to all exporters of subject merchandise not specifically listed. The weighted-average dumping margins are as follows:
This notice constitutes the antidumping duty order with respect to CWP from the PRC pursuant to section 736(a) of the Act. Interested parties may contact the Department's Central Records Unit, Room 1217 of the main Commerce building, for copies of an updated list of antidumping duty orders currently in effect.
This order is published in accordance with section 736(a) of the Act and 19 CFR 351.211.