thefederalregister.com

Daily Rules, Proposed Rules, and Notices of the Federal Government

NUCLEAR REGULATORY COMMISSION

[NRC-2012-0195]

Configuration Management Plans for Digital Computer Software Used in Safety Systems of Nuclear Power Plants

AGENCY: Nuclear Regulatory Commission.
ACTION: Draft regulatory guide; request for comment.
SUMMARY: The U.S. Nuclear Regulatory Commission (NRC or the Commission) is issuing for public comment draft regulatory guide (DG), DG-1206, "Configuration Management Plan for Digital Computer Software Used in Safety Systems of Nuclear Power Plants." The DG-1206 is proposed Revision 1 of RG 1.169, dated September 1997. This revision endorses, with clarifications, the enhanced consensus practices for planning software configuration management (SCM) as described in the Institute of Electrical and Electronics Engineers (IEEE) Standard 828-2005, "IEEE Standard for Software Configuration Management Plans."
DATES: Submit comments by November 23, 2012. Comments received after this date will be considered if it is practical to do so, but the NRC is able to ensure consideration only for comments received on or before this date. Although a time limit is given, comments and suggestions in connection with items for inclusion in guides currently being developed or improvements in all published guides are encouraged at any time.
ADDRESSES: *Federal Rulemaking Web Site:Go tohttp://www.regulations.govand search for Docket ID NRC-2012-0195. Address questions about NRC dockets to Carol Gallagher; telephone: 301-492-3668; email:Carol.Gallagher@nrc.gov.

*Mail comments to:Cindy Bladey, Chief, Rules, Announcements, and Directives Branch (RADB), Office of Administration, Mail Stop: TWB-05-B01M, U.S. Nuclear Regulatory Commission, Washington, DC 20555-0001.

*Fax comments to:RADB at 301-492-3446.

For additional direction on accessing information and submitting comments, see "Accessing Information and Submitting Comments" in theSUPPLEMENTARY INFORMATIONsection of this document.

FOR FURTHER INFORMATION CONTACT: Karl Sturzebecher, Office of Nuclear Regulatory Research, U.S. Nuclear Regulatory Commission, Washington, DC 20555-0001; telephone: 301-251-7494 or emailKarl.Sturzebecher@nrc.gov.
SUPPLEMENTARY INFORMATION: I. Accessing Information and Submitting Comments A. Accessing Information

Please refer to Docket ID NRC-2012-0195 when contacting the NRC about the availability of information regarding this document. You may access information related to this document, which the NRC possesses and are publicly available, by any of the following methods:

Federal Rulemaking Web Site:Go tohttp://www.regulations.govand search for Docket ID NRC-2012-0195.

NRC's Agencywide Documents Access and Management System (ADAMS):You may access publicly available documents online in the NRC Library athttp://www.nrc.gov/reading-rm/adams.html.To begin the search, select “ADAMS Public Documents” and then select “Begin Web-based ADAMS Search.” For problems with ADAMS, please contact the NRC's Public Document Room (PDR) reference staff at 1-800-397-4209, 301-415-4737, or by email topdr.resource@nrc.gov.The draft regulatory guide is available electronically under ADAMS Accession Number ML103200044. The regulatory analysis may be found in ADAMS under Accession Number ML103200047.

Regulatory guides are not copyrighted, and NRC approval is not required to reproduce them.

NRC's PDR:You may examine and purchase copies of public documents at the NRC's PDR, Room O1-F21, One White Flint North, 11555 Rockville Pike, Rockville, Maryland 20852.

B. Submitting Comments

Please include Docket ID NRC-2012-0195 in the subject line of your comment submission, in order to ensure that the NRC is able to make your comment submission available to the public in this docket.

The NRC cautions you not to include identifying or contact information in comment submissions that you do not want to be publicly disclosed. The NRC posts all comment submissions athttp://www.regulations.govas well as enters the comment submissions into

ADAMS. The NRC does not edit comment submissions to remove identifying or contact information.

If you are requesting or aggregating comments from other persons for submission to the NRC, then you should inform those persons not to include identifying or contact information in their comment submissions that they do not want to be publicly disclosed. Your request should state that the NRC will not edit comment submissions to remove such information before making the comment submissions available to the public or entering the comment submissions into ADAMS.

II. Further Information

The NRC is issuing for public comment a draft guide in the NRC's “Regulatory Guide” series. This series was developed to describe and make available to the public such information as methods that are acceptable to the NRC staff for implementing specific parts of the NRC's regulations, techniques that the staff uses in evaluating specific problems or postulated accidents, and data that the staff needs in its review of applications for permits and licenses.

The draft regulatory guide entitled “Configuration Management Plans for Digital Computer Software Used in Safety Systems of Nuclear Power Plants” is temporarily identified by its task number, DG-1206. The DG-1206 is proposed Revision 1 of RG 1.169, “Configuration Management Plans for Digital Computer Software Used in Safety Systems of Nuclear Power Plants” dated September 1997.

This RG endorses IEEE Std. 828-2005, “IEEE Standard for Software Configuration Management Plans,” issued in 2005, with the exceptions stated in the regulatory positions. IEEE Std. 828-2005 describes methods acceptable to the NRC staff for use in complying with the NRC's regulations for promoting high functional reliability and design quality in software used in safety systems. In particular, the methods are consistent with part 50 of Title 10 of the Code of Federal Regulations (10 CFR), “Domestic Licensing of Production and Utilization Facilities,” Appendix A, “General Design Criteria for Nuclear Power Plants,” General Design Criterion 1, “Quality Standards and Records,” which requires, in part, that the nuclear power unit licensee maintain or control appropriate records of the design and testing of structures, systems, and components important to safety throughout the life of the unit.

This draft regulatory guide is part of a series of 6 complimentary guides addressing the issue of digital software in nuclear power plant applications. The following is a complete list of all 6 of the DGs:

1. DG-1267 is proposed revision 2 of RG 1.168, “Verification, Validation, Reviews, and Audits for Digital Computer Software used in Safety Systems of Nuclear Power Plants.” DG-1267 is available in ADAMS at Accession number ML103160431;

2. DG-1206 is proposed revision 1 of RG 1.169, “Configuration Management Plans for Digital Computer Software used in Safety Systems of Nuclear Power Plants.” DG-1206 is available in ADAMS at Accession number ML103200044;

3. DG-1207 is proposed revision 1 of RG 1.170, “Software Unit Testing for Digital Computer Software Used in Safety Systems of Nuclear Power Plants.” DG-1207 is available in ADAMS at Accession number ML083370243;

4. DG-1208 is proposed revision 1 if RG 1.171, “Software Unit Testing for Digital Computer Software used in Safety Systems of Nuclear Power Plants.” DG-1208 is available in ADAMS at Accession number ML103120751;

5. DG-1209 is proposed revision 1 of RG 1.172, “Software Requirement Specifications for Digital Computer Software and Complex Electronics used in Safety Systems of Nuclear Power Plants.” DG-1209 is available in ADAMS at Accession number ML103080963;

6. DG-1210 is proposed revision 1 of RG 1.173, “Developing Software Life-Cycle Processes for Digital Computer Software used in Safety Systems of Nuclear Power Plants.” DG-1210 is available in ADAMS at Accession number ML103120727.

Dated at Rockville, Maryland, this 9th day of August 2012.

For the Nuclear Regulatory Commission.

Thomas H. Boyce, Chief, Regulatory Guide Development Branch, Division of Engineering,Office of Nuclear Regulatory Research.