Daily Rules, Proposed Rules, and Notices of the Federal Government
On June 6, 2012, the Department published the preliminary results of this review in the
The merchandise subject to this order is certain welded carbon-quality light-walled steel pipe and tube, of rectangular (including square) cross section, having a wall thickness of less than 4 mm. The term carbon-quality steel includes both carbon steel and alloy steel which contains only small amounts of alloying elements. Specifically, the term carbon-quality includes products in which none of the elements listed below exceeds the quantity by weight respectively indicated: 1.80 percent of manganese, or 2.25 percent of silicon, or 1.00 percent of copper, or 0.50 percent of aluminum, or 1.25 percent of chromium, or 0.30 percent of cobalt, or 0.40 percent of lead, or 1.25 percent of nickel, or 0.30 percent of tungsten, or 0.10 percent of molybdenum, or 0.10 percent of niobium, or 0.15 percent vanadium, or 0.15 percent of zirconium. The description of carbon-quality is intended to identify carbon-quality products within the scope.
The welded carbon-quality rectangular pipe and tube subject to this order is currently classified under the Harmonized Tariff Schedule of the United States (HTSUS) subheadings 7306.61.50.00 and 7306.61.70.60. While HTSUS subheadings are provided for convenience and CBP's customs purposes, our written description of the scope of the order is dispositive.
As noted above, the Department has no comments concerning the
The Department shall determine, and U.S. Customs and Border Protection (CBP) shall assess, antidumping duties on all appropriate entries, in accordance with 19 CFR 351.212(b)(1). The Department intends to issue appropriate assessment instructions for the companies subject to this review to CBP 15 days after the date of publication of these final results.
Noksel reported that it was the importer of record for all of its U.S. sales of subject merchandise. Pursuant to 19 CFR 351.212(b)(1), we have calculated an importer-specific assessment rate based on the ratio of the total amount of antidumping duties calculated for the examined sales to the total entered value of those sales.
To determine whether the duty assessment rates were
The Department clarified its “automatic assessment” regulation on May 6, 2003.
The following deposit rates will be effective upon publication of the final results of this administrative review for all shipments of light-walled rectangular pipe and tube from Turkey entered, or withdrawn from warehouse, for consumption on or after the publication date, as provided by section 751(a)(2)(C) of the Act: (1) For companies covered by this review, the cash deposit rate will be the rates listed above; (2) for previously reviewed or investigated companies not listed above, the cash deposit rate will continue to be the company-specific rate published for the most recent final results in which that manufacturer or exporter participated; (3) if the exporter is not a firm covered in this review, a prior review, or the original LTFV investigation, but the producer is, the cash deposit rate will be the rate established for the most recent final results for the manufacturer of the merchandise; and (4) if neither the exporter nor the producer is a firm covered in this or any previous review conducted by the Department, the cash deposit rate will be 27.04 percent
This notice serves as a final reminder to importers of their responsibility under 19 CFR 351.402(f)(2) to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this review period. Failure to comply with this requirement could result in the Secretary's presumption that reimbursement of antidumping duties occurred and the subsequent assessment of double antidumping duties.
This notice serves as the only reminder to parties subject to administrative protective order (APO) of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3). Timely written notification of return/destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and the terms of an APO is a sanctionable violation.
This administrative review and notice are issued and published in accordance with sections 751(a)(1) and 777(i)(1) of the Act.