thefederalregister.com

Daily Rules, Proposed Rules, and Notices of the Federal Government

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OPPT-2012-0804; FRL-9366-9]

Certain New Chemicals; Receipt and Status Information

AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
SUMMARY: The Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e.,a chemical not on the TSCA Chemical Substances Inventory (TSCA Inventory)) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. In addition under TSCA, EPA is required to publish in theFederal Registera notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish in theFederal Registerperiodic status reports on the new chemicals under review and the receipt of notices of commencement (NOC) to manufacture those chemicals. This document, which covers the period from September 10, 2012 to September 30, 2012, and provides the required notice and status report, consists of the PMNs pending or expired, and the NOC to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.
DATES: Comments identified by the specific PMN number or TME number, must be received on or before November 23, 2012.
ADDRESSES: *Federal eRulemaking Portal: http://www.regulations.gov.Follow the online instructions for submitting comments.

*Mail:Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460-0001.

*Hand Delivery:OPPT Document Control Office (DCO), EPA East Bldg., Rm. 6428, 1201 Constitution Ave. NW., Washington, DC. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is (202) 564-8930. Such deliveries are only accepted during the DCO's normal hours of operation, and special arrangements should be made for deliveries of boxed information.

Instructions:EPA's policy is that all comments received will be included in the docket without change and may be made available online athttp://www.regulations.gov,including any personal information provided, unless the comment includes information claimed to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Do not submit information that you consider to be CBI or otherwise protected through regulations.gov or email. The regulations.gov Web site is an "anonymous access" system, which means EPA will not know your identity or contact information unless you provide it in the body of your comment. If you send an email comment directly to EPA without going through regulations.gov, your email address will be automatically captured and included as part of the comment that is placed in the docket and made available on the Internet. If you submit an electronic comment, EPA recommends that you include your name and other contact information in the body of your comment and with any disk or CD-ROM you submit. If EPA cannot read yourcomment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment. Electronic files should avoid the use of special characters, any form of encryption, and be free of any defects or viruses.

Docket:All documents in the docket are listed in the docket index available athttp://www.regulations.gov.Although listed in the index, some information is not publicly available,e.g.,CBI or other information whose disclosure is restricted by statute. Certain other material, such as copyrighted material, will be publicly available only in hard copy. Publicly available docket materials are available electronically athttp://www.regulations.gov,or, if only available in hard copy, at the OPPT Docket. The OPPT Docket is located in the EPA Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution Ave. NW., Washington, DC. The EPA/DC Public Reading Room hours of operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The telephone number of the EPA/DC Public Reading Room is (202) 566-1744, and the telephone number for the OPPT Docket is (202) 566-0280. Docket visitors are required to show photographic identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be visible at all times in the building and returned upon departure.

FOR FURTHER INFORMATION CONTACT: For technical information contact:Bernice Mudd, Information Management Division (7407M), Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460-0001; telephone number: (202) 564-8951; fax number: (202) 564-8955; email address:mudd.bernice@epa.gov.

For general information contact:The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 554-1404; email address:TSCA-Hotline@epa.gov.

SUPPLEMENTARY INFORMATION:

I. General Information A. Does this action apply to me?

This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the PMNs addressed in this action.

B. What should I consider as I prepare my comments for EPA?

1.Submitting CBI.Do not submit this information to EPA throughregulations.govor email. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2.

2.Tips for preparing your comments.When submitting comments, remember to:

i. Identify the document by docket ID number and other identifying information (subject heading,Federal Registerdate and page number).

ii. Follow directions. The Agency may ask you to respond to specific questions or organize comments by referencing a Code of Federal Regulations (CFR) part or section number.

iii. Explain why you agree or disagree; suggest alternatives and substitute language for your requested changes.

iv. Describe any assumptions and provide any technical information and/or data that you used.

v. If you estimate potential costs or burdens, explain how you arrived at your estimate in sufficient detail to allow for it to be reproduced.

vi. Provide specific examples to illustrate your concerns and suggest alternatives.

vii. Explain your views as clearly as possible, avoiding the use of profanity or personal threats.

viii. Make sure to submit your comments by the comment period deadline identified.

II. Why is EPA taking this action?

EPA classifies a chemical substance as either an “existing” chemical or a “new” chemical. Any chemical substance that is not on EPA's TSCA Inventory is classified as a “new chemical,” while those that are on the TSCA Inventory are classified as an “existing chemical.” For more information about the TSCA Inventory go to:http://www.epa.gov/opptintr/newchems/pubs/inventory.htm.Anyone who plans to manufacture or import a new chemical substance for a non-exempt commercial purpose is required by TSCA section 5 to provide EPA with a PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes EPA to allow persons, upon application, to manufacture (includes import) or process a new chemical substance, or a chemical substance subject to a significant new use rule (SNUR) issued under TSCA section 5(a), for “test marketing” purposes, which is referred to as a test marketing exemption, or TME. For more information about the requirements applicable to a new chemical go to:http://www.epa.gov/oppt/newchems.

Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish in theFederal Registera notice of receipt of a PMN or an application for a TME and to publish in theFederal Registerperiodic status reports on the new chemicals under review and the receipt of NOCs to manufacture those chemicals. This status report, which covers the period from September 10, 2012 to September 30, 2012, consists of the PMNs pending or expired, and the NOCs to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

III. Receipt and Status Reports

In Table I. of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: The EPA case number assigned to the PMN, the date the PMN was received by EPA, the projected end date for EPA's review of the PMN, the submitting manufacturer/importer, the potential uses identified by the manufacturer/importer in the PMN, and the chemical identity.

Table I—40 PMNs Received From 9/10/12 to 9/30/12 Case no. Received date Projected notice end date Manufacturer/importer Use Chemical P-12-0545 9/7/2012 12/5/2012 CBI (G) Lubricant additive (G) Aromatic amido-amine-modified aliphatic hydrocarbon resin. P-12-0546 9/7/2012 12/5/2012 CBI (G) Lubricant additive (G) Aromatic amido-amine-modified aliphatic hydrocarbon resin. P-12-0547 9/12/2012 12/10/2012 CBI (S) Emulsifier for use in the manufacture of air fresheners (G) Fatty acid polyglycerin ester. P-12-0548 9/10/2012 12/8/2012 CBI (G) Dielectric fluid (G) Aryl-substituted alkane. P-12-0549 9/13/2012 12/11/2012 CBI (G) Binder fibers (G) Modified polyester. P-12-0550 9/14/2012 12/12/2012 International Flavors & Fragrances, Inc (S) Fragrance ingredient for use in fragrances for soaps, detergents, cleaners and other household products (S) Butanal, 4-(heptyloxy)-3-methyl-. P-12-0551 9/14/2012 12/12/2012 CBI (S) Feedstock for fractionation process (G) Aromatic hydrocarbon mixture. P-12-0552 9/14/2012 12/12/2012 CBI (G) Coating additive (G) Siloxanes and silicones, alkyl, substituted heteromonocycle. P-12-0553 9/14/2012 12/12/2012 CBI (S) Intermediate for use in the manufacture of polymers (G) Depolymerized waste plastics. P-12-0554 9/14/2012 12/12/2012 CBI (S) Emulsifier for use in the manufacture of air fresheners (G) Fatty acid polyglycerin ester. P-12-0555 9/14/2012 12/12/2012 CBI (G) Textile coating (G) Acrylate terpolymer. P-12-0556 9/14/2012 12/12/2012 Green carbon (S) Rubber compound reinforcement agent (in tires, rubber mats, etc.) (S) Tires, wastes, pyrolyzed, carbon black fraction. P-12-0557 9/14/2012 12/12/2012 Green carbon (S) Naptha used high octane gas & cleaning fluids; kerosene used for jet fuels; distillate fuel oil used for off-highway diesel engine and power generation; vacuum gas oil used for gasoline (S) Tires, wastes, pyrolyzed, C8-25oil fraction. P-12-0558 9/14/2012 12/12/2012 Green carbon (S) Naptha used in high octane gas & cleaning fluids; kerosene used for jet fuels; distillate fuel oil used for off-highway diesel engines and power generation; vacuum gas oil used for gasoline (S) Tires, wastes, pyrolyzed, C21-33oil fraction. P-12-0559 9/14/2012 12/12/2012 CBI (G) Open, non-dispersive use (G) Acrylic silane polymer. P-12-0560 9/17/2012 12/15/2012 Honda of America Mfg., Inc (S) Feedstock to provide mineral content for cement manufacturing (S) Slimes and sludges, aluminum and iron casting, wastewater treatment, solid waste. P-12-0561 9/17/2012 12/15/2012 CBI (G) Garment printing pre-treatment (G) Poly(urethane urea). P-12-0562 9/17/2012 12/15/2012 Eastman Chemical Company (G) Solvent (G) Aliphatic ester of a modified carboxylic acid. P-12-0563 9/17/2012 12/15/2012 CBI (G) Processing aid for triacylglycerol-based oil refining (S) Lipase. P-12-0564 9/18/2012 12/16/2012 CBI (G) Pigment dispersant (G) 2-Propenoic acid 2-methyl, alkyl ester, polymer with heteromonocycle, substituted carbomonocycle, substituted alkyl propenoate, alkyl propenoate, alkyl propenoate, tert-bu benzenecarboperoxoate-initiated. P-12-0565 9/18/2012 12/16/2012 CBI (G) Adhesive and sealant component (G) Aromatic polyester. P-12-0566 9/19/2012 12/17/2012 Firmenich Incorporated (S) Aroma for use in fragrance mixtures, which in turn are used in perfumes (S) 2-Propen-1-ol, 2-methyl-3-4(-methylphenyl)-, (2e)-. P-12-0567 9/19/2012 12/17/2012 CBI (G) Additive (G) Polyethylene glycol, polymer with diisocyanate, alkanol-blocked.
P-12-0568 9/20/2012 12/18/2012 Colonial Chemical, Inc (S) Intermediate for surfactant production (S) 3-chloro-2-hydroxypropyl)dimethyl octadecyl ammonium chloride. P-12-0569 9/21/2012 12/19/2012 Colonial Chemical, Inc (S) Intermediate for surfactant production (S) 1-(bis(2-hydroxyethyl)amino)-3-chloro-2-propanol. P-12-0570 9/21/2012 12/19/2012 International Flavors & Fragrances, Inc (S) Fragrance ingredient for use in fragrances for soaps, detergents, cleaners and other household products (S) Bicyclo[2.2.1]hept-5-ene-2-carboxylic acid, ethyl ester. P-12-0571 9/25/2012 12/23/2012 CBI (S) Pigment for coatings (G) Halogenated diketopyrrolopyrrol derivative. P-12-0572 9/25/2012 12/23/2012 CBI (G) Reactive amine for enhancing pigment dispersions (G) Aromatic amine with cyclo amino carbonyls. P-12-0573 9/25/2012 12/23/2012 CBI (G) Reactive amine for enhancing pigment dispersions (G) Amine substituted quinoacridine product. P-12-0574 9/25/2012 12/23/2012 DIC International (USA), LLC (G) Colorant for industrial inks and coatings (G) Carbopolycycle-bis(diazonium), dihalo, chloride (1:2), reaction products with metal chloride, calcium carbonate,N-(2,4-dialkylphenyl)-oxoalkanamide, potassium 4-[dioxoalkylamino] substituted benzene (1:1) and sodium hydroxide. P-12-0575 9/26/2012 12/24/2012 CBI (G) Concrete/masonry treatment (G) Alkyl-modified cyclosiloxanes. P-12-0576 9/25/2012 12/23/2012 CBI (G) Provide conductive properties to reinforcements used in composites (G) Generic carbon nanostructures. P-12-0577 9/26/2012 12/24/2012 CBI (G) Industrial feedstock chemical (G) Glycerides, C14-18, C16-18unsaturated, from fermentation. P-12-0578 9/27/2012 12/25/2012 CBI (G) Pigment dispersant (G) Vegetable oil fatty acids, reaction products with substituted amine, compounds with substituted polyethylene glycol anhydride ester alkyl ethers. P-12-0579 9/27/2012 12/25/2012 CBI (G) Performance stabilizer (G) Disubstituted alaninamide. P-12-0580 9/27/2012 12/25/2012 Dow Chemical Company (G) Component of formulated adhesive (G) Polyurethane acrylate. P-12-0581 9/27/2012 12/25/2012 CBI (S) Sulfurized fatty acid derivative used as an additive for high-pressure metal cutting/drilling applications (G) Sulfurized fatty acid derivative. P-12-0582 9/27/2012 12/25/2012 CBI (G) Manufacture of rubber products; fillers, putties; plastics additive; plastic additive; component for lubricants and metal working fluids (S) Fatty acids, C14-22, 2-ethylhexyl esters, epoxidized. P-12-0583 9/28/2012 12/26/2012 Indulor America, LP (G) Fluorescent whitening agent for dyeing paper (G) Sulfonated stilbene derivative. P-12-0584 9/28/2012 12/26/2012 CBI (G) Intermediate-destructive use (G) Alkyl phosphonate.

In Table II. of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the NOCs received by EPA during this period: The EPA case number assigned to the NOC, the date the NOC was received by EPA, the projected end date for EPA's review of the NOC, and chemical identity.

Table II—21 NOCs Received From 9/10/12 to 9/30/12 Case No. Received date Commencement notice end date Chemical P-05-0841 9/17/2012 8/29/2012 (G) Polycarbonate polyurethane. P-09-0280 9/13/2012 9/5/2012 (G) Styrene-maleic anhydride copolymer, reaction product with amino compounds. P-09-0566 9/23/2012 9/13/2012 (G) Polysiloxane epoxy polymer. P-10-0450 9/23/2012 9/6/2012 (G) Acrylic silane polymer. P-11-0287 9/23/2012 9/7/2012 (G) Acrylic silane polymer. P-12-0092 9/12/2012 9/3/2012 (G) Alkyl acrylate, polymer with alkyl acrylate, alkyl methacrylates, styrene and alkyl acid, peroxide-initiated. P-12-0223 9/14/2012 8/23/2012 (G) Glycol ether. P-12-0322 9/14/2012 9/10/2012 (G) Alkenoic acid, polymer with alkyl acrylate, peroxide-initiated, compound with amine salt. P-12-0341 9/18/2012 9/17/2012 (G) Octadecanoic acid, 12-hydroxy-, polymer with formaldehyde-aromatic amine reaction products. P-12-0349 9/24/2012 9/19/2012 (G) Alkyl thiol, manufacture of, by-products from, dstn. lights. P-12-0350 9/24/2012 9/19/2012 (G) Alkyl thiol, manufacture of, by-products from, distn. residues. P-12-0352 9/25/2012 9/21/2012 (G) Styrenated salicylic acid. P-12-0361 9/25/2012 9/14/2012 (G) Benzene, 2,4-diisocyanato-1-alkyl-, homopolymer, 1-alkanol- and 1h-imidazole-1-propanamine- and 2-oxepanone-tetrahydro-2h-pyran-2-one polymer [2-(2-butoxymethylethoxy)methylethoxy]methylethyl ester-blocked. P-12-0364 9/25/2012 9/24/2012 (S) Fatty acids, C8-18and C18-unsaturated, reaction products with isomerized oleic acid homopolymer, hydrogenated. P-12-0365 9/25/2012 9/24/2012 (S) Fatty acids, coco, reaction products with isomerized oleic acid homopolymer, hydrogenated. P-12-0368 9/25/2012 9/24/2012 (S) Fatty acids, C8-18and C18-unsaturated, reaction products with isomerized oleic acid homopolymer 2-ethylhexyl ester, hydrogenated. P-12-0369 9/25/2012 9/24/2012 (S) Fatty acids, coco, reaction products with isomerized oleic acid homopolymer 2-ethylhexyl ester, hydrogenated. P-12-0371 9/28/2012 8/27/2012 (G) Modified isothiocyanate compound. P-12-0373 9/14/2012 9/10/2012 (G) 1,4-butanediol, polymer with substituted alkane and substituted methylene biscarbomonocycle 2-hydroxyalkyl acrylate-blocked. P-12-0415 9/24/2012 9/19/2012 (G) Soybean oil, polymer with adipic acid, benzoic acid, difuntional glycols, glycerol, pentaerythritol, phthalic anhydride, terephthalic acid. P-12-0423 9/21/2012 9/19/2012 (G) Polyitaconic acid, sodium salt.

If you are interested in information that is not included in these tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available.

List of Subjects

Environmental protection, Chemicals, Hazardous substances, Imports, Notice of commencement, Premanufacturer, Reporting and recordkeeping requirements, Test marketing exemptions.

Dated: October 15, 2010. Chandler Sirmons, Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.