The FAA is revising an existing airworthiness directive (AD) that applies to Sandel Avionics Incorporated Model ST3400 TAWS/RMI units as described above. The existing AD currently requires installing a warning placard on the TAWS/RMI and revising the Limitations section of the airplane flight manual (AFM). The existing AD also requires installing

DEPARTMENT OF TRANSPORTATION : Federal Aviation Administration

This action confirms the effective date of the direct final rule that establishes Class E airspace at Hinton, OK, published in the Federal Register March 26, 2008 (73 FR 15881), Docket No. FAA2008 0328, Airspace Docket No. 08ASW4.

DEPARTMENT OF TRANSPORTATION : Federal Aviation Administration

This technical amendment corrects an error in the airspace description of a final rule published in the Federal Register on July 21, 2003 (68 FR 42962), Docket No. FAA200213013, Airspace Docket No. 02ANM10. In that rule, the description of Jet Route 10 (J10) was incorrect. This is an administrative correction to a published legal description.

DEPARTMENT OF TRANSPORTATION : Federal Aviation Administration

This rule establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace

DEPARTMENT OF TRANSPORTATION : Federal Aviation Administration

This Rule establishes, amends, suspends, or revokes STANDARD Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace

DEPARTMENT OF TRANSPORTATION : Federal Aviation Administration

We are revising an earlier NPRM for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

An internal review evidenced

DEPARTMENT OF TRANSPORTATION : Federal Aviation Administration

We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

A

DEPARTMENT OF TRANSPORTATION : Federal Aviation Administration

We propose to adopt a new airworthiness directive (AD) for all Lockheed Model 382, 382B, 382E, 382F, and 382G series airplanes. This proposed AD would require revising the FAAapproved maintenance program by incorporating new airworthiness limitations for fuel tank systems to satisfy Special Federal Aviation Regulation No. 88 requirements. This

DEPARTMENT OF TRANSPORTATION : Federal Aviation Administration